Tipping and swaging

SAA

Fully automatic stellite tipping machine for equipping of the saw teeth by resistance welding process

Blade thickness
0,8 - 3,2 mm
Tooth pitch
13 - 115 mm
Blade length standard
from 5'500 mm
Blade length optional
from 4'700 mm
Request a quoteDatasheet (PDF)
SAA

Description

ISELI stellites your saw blades using the plasma welding process as well as the resistance welding process. The stelliting process, which has been tried and tested thousands of times, is used to fit band, circular and gang saws.

Highlights

  • The structure of the stellite is not changed during welding, therefore no cracks or holes occur in the stellite
  • No tooth tips need to be cut before stelliting. If the saws are stellited repeatedly, the residual stellite does not have to be grinded away.
  • The loading of band saws is fully automatic. These are annealed in the same annealed via high frequency in the same operation.
  • The machine is equipped with a programmable control, which ensures very easy operation of the machine
  • No expert is required
  • The hydraulic control makes it possible to set each working speed individually set
  • The stellite is welded in vertically and can be adjusted in length from 4 - 10 mm. can be adjusted
  • With the same machine, band, circular and gang saws can be stellited by simple can be set up by simple retooling

Applications

Stellited tooth in plasma welding process
Stellited tooth in plasma welding process
Stellited tooth in resistance welding process
Stellited tooth in resistance welding process

Other stellite tipping and swaging machines

SAA – staBAS 100Fully automatic, hydraulically controlled swaging machine for band and gang saw bladesSAA – BNABNA 100Fully automatic stelliting welding machine for tooth setting of bandsaw and circular saw bladesSAA – samBMA100Stellite welding machine for band, frame, and circular saw bladesSAA – stellit trapez stab drahtStellite™Trapezoidal, rod, round and wire stellite